Ghostly Windsock

Materials:
1" black felt top hat,
(1) 1/2" bone ring 10 pack bag, 1/8" black satin ribbon 30 yds,
1/8" indian orange satin ribbon 30 yds.,
(1)65mm ghost bell, white satin ribbon 100 yds.

1) Cut (1) 15" piece of #5 white satin ribbon. Bend both ends in to center
and glue on top of each other. This will form 2 loops on each side with
the ribbon ends in the center glued together. This is for the ghost arms.
Glue arms centered under bottom of bell.

2) Cut (4) 18" long pieces of #5 white satin ribbon for the ghost body.
Narrow one end one each piece. Glue narrowed end over white bone ring so
that ribbon hangs over outside of ring. Repeat with 3 remaining strips of
white ribbon. One will hang in front, one in back and one one each side
to form the body. Hot glue the ring with the 4 strips of ribbon under bottom
of bell, below arms.

3) Cut the 1/8" ribbon into (2) 1 yd. pieces of each color. Tie 2 bows
using orange and black in each bow. Glue one bow on each side of ghost at
neck.

4) Tie a 18" piece of black cloth wire on to top of bell hanger.

5) Poke a hole in the top of the felt hat and slide hat over wire. Hot glue
hat on top of ghost head.
Diana*


<-back to children's crafts